ELPOS d.o.o.

Address: Radnovac 1G, 34000 Požega, Republic of Croatia

Tel.: +385 (0) 34 257 235

E-mail: elpos@elpos.hr

Web: www.elpos.hr

Firmware: SW1.6

Documentation: V1R1

Version code: SW1.6-V1R1-EN-04/2026

Contents:

• 1. Safety notes
  • 1.1. General safety measures
  • 1.2. Electrical safety
  • 1.3. Installation and wiring
  • 1.4. Terminals – overview
  • 1.5. Temperature sensor – installation and cable routing
  • 1.6. Parameter protection and operational verification
  • 1.7. Alarm and auxiliary output
  • 1.8. Prevention of unauthorised changes
  • 1.9. Maintenance and periodic checks
  • 1.10. Disposal
• 2. Legend
• 3. Device description and purpose
• 4. Technical specifications
  • 4.1. Device dimensions
  • 4.2. Wiring diagram
• 5. Thermostat operating mode
  • 5.1. User interface description
  • 5.2. Switching the device off and on
  • 5.3. How to set the relay switch-on/switch-off temperatures?
    • 5.3.1. How to set temperatures in heating mode
    • 5.3.2. How to set temperatures in cooling mode
    • 5.3.3. Example of determining temperatures in heating mode
    • 5.3.4. Example of setting temperatures in cooling mode
  • 5.4. Setting the desired temperature
  • 5.5. Adjustment of differential
  • 5.6. Temperature correction setting
  • 5.7. Settings and functions menu 
    • 5.7.1. Configuring the Temperature group
      • 5.7.1.1. Selecting the measurement unit
      • 5.7.1.2. Setting temperature input limits
      • 5.7.1.3. Selecting sensor type
      • 5.7.1.4. Heating/Cooling Mode
      • 5.7.1.5. Turn-on Delay
    • 5.7.2. Adjusting the Device Group
      • 5.7.2.1. Selecting Operating Mode
      • 5.7.2.2. Output selection
      • 5.7.2.3. Output status
    • 5.7.3. Alarm group adjustment
      • 5.7.3.1. Alarm source
      • 5.7.3.2. Alarm output selection
      • 5.7.3.3. Alarm mode
      • 5.7.3.4. Alarm settings
        • 5.7.3.4.1. Alarm off time
        • 5.7.3.4.2. Alarm on time
        • 5.7.3.4.3. Delay
        • 5.7.3.4.4. Silent mode
        • 5.7.3.4.5. Buzzer volume
        • 5.7.3.4.6. Setting alarm activation temperature
      • 5.7.3.5. Alarm output status
    • 5.7.4. Display group settings
      • 5.7.4.1. Device lock and password
      • 5.7.4.2. Device unlocking
      • 5.7.4.3. Automatic reduction of brightness intensity
      • 5.7.4.4. Brightness
      • 5.7.4.5. Status bar
• 6. Manual and time-based operating modes
  • 6.1. Manual mode
  • 6.2. Time mode
• 7. Other device options
  • 7.1. Start screen
  • 7.2. Menu auto exit
  • 7.3. Help menu
  • 7.4. Button sound
  • 7.5. Firmware
  • 7.6. About
  • 7.7. Factory reset
• 8. Language selection
• 9. Temperature sensor resistance table
  • 9.1. Elpos 10 kΩ / 25°C sensor
  • 9.2. Elpos sensor 12 kΩ / 25°C
  • 9.3. Elpos Sensor 100 kΩ / 25°C

ELPOS accepts no responsibility for any errors in this document and/or on other printed materials. ELPOS reserves the right to modify its products without prior notice. All trademarks are the property of ELPOS. All rights reserved.